Univox DLS 300 induction loop amplifier
The Univox 300 is a dedicated induction loop amplifier, covering up to 300 square metres. The built in AGC circuit maintains a clear and constant level of sound; this helps pre-vent the hearing aid from distorting.

Automatic Gain Control (AGC)
To optimise sound quality the DLS70 induction loop amplifier has AGC. The AGC circuit increases the level of quite sounds and decreases extra loud sounds. This enables the output of the induction loop to maintain a clear and constant level of sound for the hearing aid user.

Features
Constant current output - Compensating
Automatically changes for loop impedance
Conforms to BS6083 pt4 and IEC/118 Part 4
Auto compensates for field strength changes
Loop sizes from 1m2 to + 300m2
Single or two turn loop
Shelf/wall mountable (with key-hole slots)

Specification
Univox 300 induction loop amplifier specification
Power supply: 220-240Volt 50-60Hz
Output current: 60 amp peak 14A RMS
Frequency range: 100Hz to 5KHz + - 3dB
Automatic gain control dynamic range: >70dB
Attack time: 2-500ms
Decay time: 0.5-20dB/s
Loop impedance: 1 - 10 ohm constant current
Output protection: Full electronic plus fuse
Output/input ndicators: AGC and output level LEDs
Input 1: Microphone/auxiliary 0.1 mV-1V (10KOhm)
Input 2: Microphone/auxiliary 50mV-5V (10KOhm)
Line output: 0.775V/1k
Special functions: Preset anti tamper proof controls
Bass and treble: 0 + 9dB
Case dimensions: L:295mm W:188mm H:62mm
Weight: 3600g

TOP