This is the kit you require for churches up to 170 square metres. The kit contains an induction loop amplifier, audio connection lead, drum of loop cable, cable clips and easy to follow DIY fitting instructions. Choose from the optional accessory list below: any combination of one or two radio microphones microphone floor stand microphone goose neck loop listening/test meter Testing must be done on a periodic basis to comply with the Disability Discrimination Act (DDA).

Kit contents and options...
	Basic church kit B: An induction loop amplifier, audio lead for connecting loop amplifier to an existing public address system, drum of loop cable, cable clips and easy to follow DIY fitting instructions.
	Radio microphone receiver: A true diversity radio microphone receiver is supplied with each radio microphone system. Up to six radio microphones can operate in the same region.
	Radio microphone option: The wireless hand held-radio microphone system enables the speaker to use the microphone anywhere in the room. The microphone can be held in the hand, passed from person to person or clipped to a microphone floor stand or microphone goose neck.
	Radio microphone option: The wireless tie/lapel radio microphone system enables the speaker to use the microphone hands-free anywhere in the room. The microphone pack can be clipped to a belt or put in a pocket.
	Microphone stand accessory option: A microphone floor stand with boom arm to hold the hand held wireless microphone at any height or position can be used anywhere in a room. The single clamp boom arm makes height adjustment easy.
	Microphone stand accessory option: A microphone goose neck to hold the hand held wireless microphone in a fixed but flexible position can be mounted on a: Lectern, Pulpit or Reading Desk.
	Test equipment option: The loop listener/test meter measures the output of a loop system. It ensures the induction loop system operates to BS6083 Part 4. A monitor speaker for listening and a visual LED indicator makes this procedure simple. Testing must be done on a periodic basis to comply with the DDA.
	Cable tacker (with 1000 staples) option: The cable tacker* makes quick and easy work of installing loop cable. It will tack cable to wood, chipboard, plasterboard and some plastics. It is advisable to use the cable clips supplied with each kit for all other materials. *Cable tacker may vary from illustration.