This is the kit you require for areas up to 70 square metres. The Portable kit B has an internal metal shield that encapsulates and protects the induction loop amplifier and one radio microphone receiver module. Only one radio microphone must be operating with the (one) inbuilt radio microphone receiver. Choose from the optional accessory list below: wireless hand held or tie/lapel radio microphone any combination of one or two leaded microphones microphone floor stand loop listening/test meter Testing must be done on a periodic basis to comply with the Disability Discrimination Act (DDA).

Kit contents and options...
	Basic portable kit B: Aluminium case, inbuilt induction loop amplifier/radio microphone module, power supply lead, loop drum and easy to follow operation instruction manual. Optional extras: loop listener/tester, radio microphone(s), up to two leaded hand-held or boundary microphone(s).
	Radio microphone option: The wireless hand-held radio microphone enables the speaker to use the microphone anywhere in the room. The microphone can be held in the hand, passed from person to person or clipped to a microphone floor stand.
	Radio microphone option: The wireless tie/lapel radio microphone enables the speaker to use the microphone hands-free anywhere in the room. The microphone pack can be clipped to a belt or put in a pocket.
	Radio microphone option: The wireless boundary radio microphone is especially effective at group a meeting around a table. The microphone can simply be placed in the middle of the table (no hazardous trailing cable).
	Leaded microphone option: The leaded hand-held microphone enables the speaker to use the microphone up to 5 meters from the portable loop case. The microphone can be held in the hand, passed from person to person or clipped to a microphone floor stand.
	Boundary microphone option: The leaded boundary microphone enables a meeting around a table. The microphone can be placed in the middle of the table up to 5 meters from the portable loop case.
	Microphone stand accessory option: A microphone floor stand with boom arm to hold the hand-held microphone at any height or position can be used anywhere in a room. The single clamp boom arm makes height adjustment easy.
	Test equipment option: The loop listener/test meter measures the output of a loop system. It ensures the induction loop system operates to BS6083 Part 4. A monitor speaker for listening and a visual LED indicator makes this procedure simple. Testing must be done on a periodic basis to comply with the DDA.